Novatel Expedite L10-G, Руководство по интеграции

Страница: 7 / 35

vi novatelwireless.com
Regulatory Compliance
FCC CERTIFICATION
Novatel Wireless certifies that the Expedite L10-G GSM Radio Module complies with the RF
requirements applicable to broadband PCS equipment operating under the authority of 47
CFR Part 24, Subpart E and Part 22 Subpart H of the FCC Rules and Regulations. This
certification is contingent upon installation, operation and use of the Expedite L10-G module
and its host product in accordance with all instructions provided to both the OEM and end
user. When installed and operated in a manner consistent with the instructions provided, the
Expedite L10-G module meets the maximum permissible exposure (MPE) limits for general
population / uncontrolled exposure as defined in Section 1.1310 of the FCC Rules and
Regulations.
The Expedite L10-G module is designed for use in a variety of host units, enabling the host
platform to perform wireless data communications. However, there are certain criteria relative
to integrating the modem into a host platform such as a PC, laptop, handheld, monitor and
control unit, etc. that must be considered to ensure continued compliance with FCC
compliance requirements.
Important Information for Canada/USA OEM Integrators
This section provides guidance for using the Expedite L10-G in host devices through the FCC
Permissive Change process. When utilizing the permissive change process, Novatel Wireless,
the grantee, is responsible for all integrations and must be consulted on all regulatory matters
involving the Expedite L10-G.
The Expedite L10- G module is granted with FCC/IC modular approval for mobile
1
applications, and may be installed as a standalone
2
transmitter in final products meeting the
following conditions. If the following conditions are followed, it may be used in final products
without additional FCC/IC certification. Otherwise, additional FCC/IC approvals must be
obtained.
1
Mobile Device Definition – FCC defines as a transmitting antenna located at a distance
≥
20cm from the user.
2
Standalone is defined as a single transmitter transmitting as opposed to 2 or more
transmitters transmitting simultaneously.