Novatek SRAT5A, Руководство по эксплуатации и техническому обслуживанию

Страница: 8 / 11

8
J. To assembly angle head, place bearing over ho
le “D” in stripper plate and press on spindle right home to shoulder.
K.
With bearing housing over hole “B”, thread upward, place spindle (thread downward) and bearing over housing and
with tube press bearing on outer race fully home.
L.
Fit woodruff key, gear wheel, circlip and oiler. Place bearing over hole “C” and, with threat at top, press spindle into
bearing up to the shoulder.
M. Fit circlip. Locate spindle assembly into angle head. Screw bearing housing in and tighten.
N. Press two bea
rings onto pinion using hole “C” in stripped plate slid pinion assembly into angle head housing and
mesh gears.
Locate front space onto pinion bearings and fit coupling onto pinion splines.
O. There should now be two sub-assemblies for the right angle drive
air motor”
- 1
– The angle head assembly.
- 2
– The motor and throttle assembly with lock-ring separate.
P. Replace back flange and tighten lock screw.
ELECTRIC DIRVE MOTOR SUB-ASSEMBLY INSPECTION
In the even the electric drive unit has accumulated 800 hours +/- any increment there after (1,000, 1,500 etc.), the drive unit
should be inspected as required to maintain warranty coverage.
Tool Model:
Right Angle Grinder Air Motor (only)
Part Number: SRAT5A & SRAT7A
Ref # Part # Description
1A SRATARA5 Right Angle Motor Complete
1 RPTA735 Motor Housing
2 RPTA930 Angle Head
3 RPTA685 Lock Ring
4 RPTA686 Rotor
5 RPTA451 Cylinder
6 RPTA421 Vanes (5 off)
7 RPTA415 Rear Bearing Housing
8 RPTA346 Front Bearing Housing
9 RPTA101 Rotor Spacer
10 RPTA604 Bearing
11 RPTA689 Bearing
12 RPTA722 Bearing
13 RPTA723 Bearing
14 RPTA605 Bearing
15 RPTA725 Spindle
16 RPTA100 Circlip
17 RPTA142 Circlip
18 RPTA724 Bearing Housing
19 RPTA727 Gear Wheel & Pinion Set (#19 &#20)
20 RPTA727 Pinion & Gear Wheel Set (#19 &#20)
23 RPTA104 Back Nut
24 RPTA249 Oiling Screw
25 RPTA254 Oiler
– Gear Lube
26 RPTA626 Rear Space
27 RPTA172 Wood Ruff Key
28 RPTA728 Front Spacer
29 RPTA729 Coupling
30 RPTA730 Back Flange
34 RPTA732 Silencer Cover & Screws
35 RPTA342 Lever
36 RPTA756 Side Handle
38 RPTA718 Throttle Housing
39 RPTA719 Throttle Lever Assembly
40 RPTA141 Lever Pin
41 RPTA330 O-ring
42 RPTA143 Throttle Valve Stem
45 RPTA146 Throttle Plug
46 RPTA177 Lever Return Spring
52 RPTA108 Locking Screw (2)