Novatek-electro EM-481, Руководство по эксплуатации

Страница: 4 / 40

-
4
-
EM-481 NOVATEK-ELECTRO
This Operating Manual is intended to familiarize you with the design, the requirements for safety, operation and
maintenance procedures of the RS-485 interface controller EM-481 (hereinafter referred to as the "device", "EM-481").
The device meets the requirements of the following:

EN 60947-1, Low-voltage switchgear and controlgear; Part 1; General rules;

EN 60947-6-2, Low-voltage switchgear and controlgear; Part 6-2; Multiple function equipment; Control and protective
switching devices (or equipment) (CPS);

EN 55011, Industrial, scientific and medical RF equipment; Electromagnetic interference characteristics; Limits and
methods of measurement;

IEC 61000-4-2, Electromagnetic compatibility; Part 4-2; Testing and measurement techniques; Electrostatic
discharge immunity test.
Harmful substances in amounts exceeding maximum permissible concentrations are not available .
The device versions are listed in Appendix A.
Terms and abbreviations:

10Base-T is Ethernet standard for twisted pair communication with the speed of 10 Mbit/s;

100Base-T is Ethernet standard for twisted pair communication with the speed of 100 Mbit/s;

8P8C/RJ45 is unified connector used for 10Base-T/100Base-T network connections;

ASCII is standard character encoding table;

Client is the device, which is addressing the other device (server) with the query to perform certain functions;

Display is OLED graphical led;

DHCP
– It is the protocol that allows network nodes automatically obtaining the parameters of TCP/IP (IP
address);

Ethernet is a standard for packet network communication and transmitting data between units (e.g., PCs);

FTP is FTP protocol of file transfer according to TCP/IP standard;

GPRS is technology of data packet transmission by mobile communication;

GSM The standard of digital mobile communication of the second generation;

HSPA - The technology of high speed packet data transmission using mobile communication;

HTTP is a protocol for transferring Web-pages and other data using "client-server" technology;

Indicator is single LED indicator;

Internet is the global routing system of units for storing and transferring data;

IP (protocol) is routable protocol for transferring data by Ethernet. It is a part of TCP/IP and used for Internet;

IP (address) is a node address, which is unique within a single network, operating via IP protocol;

IPv4 is four byte IP-address;

MAC (address)
– is the address used for device authentication during Ethernet transmissions. It is usually
unique although qualified personnel can change it under certain circumstances;

MAC-48 is six byte MAC-address;

MODBUS is the standard and protocol for packet communication using the "client-server" technology for
industrial electronic units;

MODBUS RTU is the communication protocol of the unit for byte wise transfer of the packet;

MODBUS ASCII is communication protocol of the units for the transfer of packet in the form of ASCII-symbols;

MODBUS TCP is the protocol for transferring Modbus packets using the TCP/IP standard;

Packet is a block of data to be transmitted between devices;

RS-485/EIA-485 is network standard for communicating units using the twisted pair;

Server is a unit, which performs specific functions upon query of other units;

SMS is standard and technology of transmitting the brief messages via mobile communication;

TCP/IP is the standard and a set of protocols for packet transferring data via the networks with delivery
verification;

Twisted pair is the pair of insulated conductors inside the cable, which are twisted together to reduce the
distortion of the transmitted signals;

UMTS - The third generation mobile communication system for GSM-based networks;

WEB is the system for accessing documents on the servers, used in the Internet;

WEB-page is the document, file and resource, which is available on the Web-server;

WEB-browser is client for accessing the WEB-pages, which is primarily using the HTTP protocol.
1. SERVICE
1.1. Device service
EM-481 provides data collection from connected MODBUS devices, data transfer to the server, data access
(via MODBUS TCP or SMS text messages), event tracking and response to events (sending SMS notifications,
recording values to MODBUS devices).
EM-481 provides:

Flexible options of connection (via wire or wireless communication
GSM or UMTS
, automatic method
selection of communicating with a server, automatic or manual selection of GSM provider and communication