Bottom-up Roller Blind Fitting Instructions
Your blind will be supp
l
ied with
universal
wall (face) or bottom fix bracket
s
.
3.
Fixing the pulley guides and cleat hook
cleat (plus screw
pull cord
s)
top fix
wall
fix
knotholder detail
on reverse of blind
1. Components
2 x Pulley guides
(and screws capable
of being top or wall
fixed
)
inside recess fixing
outside recess fixing
cleat
2.
Fixing the Headbox
.
Face or Bottom Fix.
Universal Brackets are supplied.
Place the brackets on the cill or the wall
,
positioning
them 50mm from
either end of the recess
or the end of the cassette
.
O
n blinds over
90
cm you will be
provided with a
n
extra b
racket
for
every 80cm of
width, these
are
to be spaced and fitted equally across the width of
the blind.
Pencil through the fixing holes,
drill and screw. Place the front of the
headbox into the bracket and snap
the blind back into position.
PLEASE SEE OVER FOR FURTHER FITTING INSTRUCTIONS
Young children can be strangled by loops in pull cords, chains, tapes and inner
cords that operate the product. To avoid strangulation and entanglement, keep cords
out of the reach of young children. Cords may become wrapped around a child’s neck.
Move beds, cots and furniture away from window covering cords. Do not tie cords
together. Make sure cords do not twist and create a loop.
Universal Brackets
max. 800 mm
max. 50mm
max. 50mm
a)
The 2 pulley guides supplied can be fixed inside the recess
(to the ceiling) or outside the recess (to the wall) depending
on how you fixed your headbox - see opposite.
Please ensure that when attaching pulleys they align with the
knot holders on the reverse of the blind. This will prevent the
blind rolling up unevenly.
b)
Drill and screw the pulley guides at 50mm in from the ends
of the cassette to the first hole of the pulley guide
.
c)
Installing the supplied
c
leat reduces the the hazards of
strangulation and entanglement of young children by limiting
access to the control cord. Fix the cleat on the pull cord side at
a minimum of 1.5m off the floor either inside or outside the
recess. Please ensure that suitable fixings are used so the cleat
cannot become detached.
