20 of 33
xDR-DSP
– Diver Intercom Manual
Build 39 Date: 30-08-2021
Wireless
These settings will only work when the BTEXT print is installed internal on the xDR print. Most xDR Diver intercom units
are prepared with the wiring of antennas and control buttons for the use of the Bluetooth headsets. That means that an
BTEXT print can easily be installed post build along with the purchase of Bluetooth headsets WLHEADSET3.
- MAIN SETTINGS
Wireless
>
---Wireless---
WHS1 can hear
WHS1 Can hear
D1 D2 T1 H2 AUX
---Wireless---
WHS1 Mic gain
WHS1 mic gain
XX
{Value 0-100}
---Wireless---
WHS2 can hear
---Wireless---
WHS2 Mic gain
---Wireless---
To main settings
4CH xDR will also show D3,D4 &T2
Can Hear
---Wireless---
WHS1 can hear
WHS1 Can hear
D1 D2 T1 H2 AUX
At the WHS1 you can select which audio source the wireless headset will hear.
See Chapter
for a full explanation of the can hear function.
Mic Gain
---Wireless---
WHS1 Mic gain
WHS1 mic gain
XX
{Value 0-100}
This setting is the gain (power) value for the wireless headset. You can increase or decrease
the value to the optimum value. In this way you can level the gain (volume) with the Diver
Mic gain (volume) to have both on the same loudness to the audio outputs. This gain setting
is before the volume control of the Tender to Diver Volume control on the panel and final
Head Gain to the Diver. This means that you have actually 3 steps of Volume settings to the
diver earphones. The display shows the level (Black bars) of sound coming from the headset
and the set value XX.
When someone speaks into the headset you will see the bars increasing from left to right.
Adjust the gain so that the level bars move past the middle of the screen.
B
T
E
X
T
B
lu
e
To
o
th
a
d
d
-o
n
f
o
r
2
x
W
ir
e
le
ss
H
e
a
d
se
ts
Mic
Wireless Headset1
Mic
Wireless Headset2
WHS 1 Mic Gain
WHS 2 Mic Gain
Head gain
+
-
Volume
Tender to Diver
Mic
Head
Diver 1
Isola tor
7 watt
Diver 2,3&4
Isola tor
Rec1
Volume
Audio1 out
Rec1 out
Aux Out
This diagram shows the audio
routing from the Wireless
headsets to the Divers and
audio outputs. The audio level
at the diver is influenced by the
WHS x Mic Gain, the Volume
Tender to diver control, and last
by the set Head gain.
Adjusting the levels of WHS x
Mic Gain also influence the
audio levels to audio outs and
other divers.
