User Manual of
3D Video Controller
www.novastar-led.cn
10
6.
Operational motion instruction
Knob:
Press the knob under main interface to enter the operation interface of menu;
Rotate the knob to select menu or press the knob under the operation interface of menu to select current
menu or enter submenu;
Rotate the knob to adjust the parameter after selecting the menu with parameter; press the knob again for
confirmation after adjustment.
ESC:
Return key, exit current menu or operation.
DVI,HDMI:
Video Source switch; the key is bright after press when the video source has signal; the key flashes
when the input of video source has no signal.
3D
Mode switch of 3D/2D video source;
Fn
Custom shortcut key. Fn key is bright after entering into shortcut menu or function and will become off after
exiting or closing the function;
Key lock/unlock
: long press
knob
and
ESC
key simultaneously.
7.
Main Interface
A.
It indicates that the selected input video source, Flashes when there is no signal and is highlighted when there is signal;
B.
It indicates current signal state of each video, highlight indicates that the video source has signal; otherwise, there is no
signal;
C.
It indicates the size of LED display: 128×128
D.
It indicates the mode of video source:
indicates that 3D function has been enabled;
It indicates that
3D function has not been enabled;
E.
It indicates that the right eye takes priority in 3D and can only be displayed after 3D function has been enabled;
F.
It indicates that current communication mode is serial control. As the priority of default serial control is the lowest, it is
