Checking Installation
NOTE!
The system programming must be downloaded to the
Lingo panel
before
the installation can be checked.
Once the system programming has been downloaded, the installation can be
checked locally or remotely.
Locally
To check the installation locally, use the optional touchscreen (if the system is
equipped with one) or a laptop computer/PC running iScope
®
or ESS32 software.
The laptop/PC connects to Lingo via any
one
of the following three methods:
§
The RS-232 direct-connect port at the bottom right side of the Lingo
electronics assembly using the RS-232 adapter cable (Novar Controls Part No.
600540000)
§
The Ethernet port at the bottom right side of the Lingo electronics assembly
(using the proper Ethernet components and cables; contact the network
administrator for more information)
§
The NovarNet
®
connection at the lower right side of the Lingo baseplate
assembly transition board, provided the PC is equipped with a NovarNet
Interface Module (NIM)
Remotely
Lingo can be accessed and checked remotely via
either
of the following two
methods:
§
The dial-up telephone network connected to a phone line as previously
described under “Connecting to the Telephone Network”
§
The Ethernet port at the bottom right side of the Lingo electronics assembly
(using the proper Ethernet components and cables)
4
Doc. #569066000—B
7/30/04
Lingo Electronic Assembly Installation Instructions