23
7. Using the hot-air fryer in operation
This oil-free air fryer can cook a wide variety of dishes. You can find recipe ideas here in Chapter 8 or on
the Internet at
www.novaq.de.
a) Carefully pull the pan out of the air fryer (Figure
○
E ).
b) Put the ingredients in the pan on the grid (Figure
○
E ).
c) Push the pan and the grid back into the hot-air fryer (Figure
○
C ). Please pay attention to the guide
rail inside the deep fryer.
Never use the pan without the grid.
Warning: do not touch the pan and grid during and for some time after use as they will get
very hot. Hold the pan only by the handle.
d) Determine the required cooking time for the ingredient (see section "Settings" in this chapter).
e)
Some ingredients have to be shaken halfway through the preparation time (see section "Settings" in
this chapter). To shake the ingredients, pull the pan out of the appliance by the handle and shake it.
Then slide the pan back into the fryer.
f) When you hear the timer bell, the set cooking time has expired. Pull the pan out of the appliance and
place it on a wire shelf or other suitable heat-resistant surface.
g) Check that the ingredients are done cooking.
If the ingredients aren't ready, just slide the pan back into the appliance and set the timer for a few
extra minutes.
h) To remove ingredients (e.g. French fries), pull the pan out of the air fryer and place it on a suitable
heat-resistant surface.
The pan and the ingredients are hot. Depending on the type of ingredients in the hot-air fryer, steam
can escape from the pan!
i) Remove the ingredients from the pan.
Do not turn the basket over while the pan is still attached as excess oil that has built up at the bottom of
the pan can spill onto the ingredients.
Tip: To remove large or fragile ingredients, use tongs to lift the ingredients out of the pan.
j) When a batch of ingredients is ready, the hot-air fryer is immediately ready to prepare another batch.
24
Using the Control Panel (refer to device overview on page 2)
Button
○
1 – Power Button
Once the pan and grid are properly placed in the main unit body, the power button will illuminate.
Pressing the on / off button for 3 seconds sets the standard temperature of the appliance to 200°C,
while the default cooking time is set to 15 minutes. If you select the power button a second time, the
cooking process will start. Press the power button for 3 seconds to turn off the entire device during the
cooking process. All lights go out, the fan switches off after a short run-on time.
Note: During cooking, you can touch this button to stop.
Button
○
2 – Preset Button
This button allows you to choose from 8 preset programs for the most popular foods. After the selection,
the specified time and temperature function begins.
Indicator lights
○
11 –
○
18 – Recipe indicator
Recipe indicator of 8 preset programs for the most popular foods. Press the presetting button (button
○
2 ) to select desired preset program.
Button
○
3 &
○
4 – Temperature Control Buttons
Use the + and - buttons to increase or decrease the temperature by 5°C. Keeping a button held down
will rapidly change the temperature setting. Temperature control range: 80°C - 200°C.
Button
○
5 &
○
6 – Timer Control Buttons
Use the + and - buttons to lengthen or shorten the cooking time by one minute. Keeping a button held
down will rapidly change the time setting. The duration is adjustable up to a maximum of 60 minutes.
Indicator light
○
7
Heating indicator: Symbol lights up when heating.
Indicator light
○
8
Fan indicator: Symbol lights up when the internal fan is running.
Indicator light
○
9
Temperature indicator: The temperature is shown in display field
○
19 .
Indicator light
○
10
Timer indicator: The remaining time is shown in display field
○
19 .
Содержание NV-600ABK
Страница 16: ......
