NovaLynx Corporation
110-WS-S10
Page 14
August 2021
8.2
View in MetView (MaxiMet Compact Weather Stations)
MaxiMet sensors may be monitored using MetView software. Download here:
http://gillinstruments.com/main/software.html
1.
Begin by removing the SD card from the logger. (When MetView starts, a lot of communications
occur to let MetView know how to display the data. If the card were installed, these messages
would be logged.)
a.
If the logger is operating, press the purge button to save the buffer contents to the memory
card, then remove the SD card from the logger.
b.
If the logger is powered down, remove the SD card, then connect power to the logger by
connecting the red battery plug.
2.
Connect the USB cable to your computer. Launch MetView.
3.
Mark the "Connect to first device found" checkbox, then click "Scan"
4.
The MetView dashboard will display the sensor data.
5.
After MetView is loaded and the display is indicating data, the SD card can be inserted to log the
data.
NOTE: MetView software can also log data, but this function is independent of the logging
performed by the S10 logger.
