Novakon Systems NM-200 Pro Series, Руководство оператора

Страница: 17 / 47

13. Head Rotation Lock Bolts – There are two bolts, one on either side of the mill head that when
loosened, allow the operator to rotate the mill head between 0 and 90 degrees in either
direction.
14. Spindle with R-8 nose taper – The NM-200 utilizes a spindle with an R-8 taper nose for
supporting and locating work holding tools. Any standard tool holding equivalent to the R-8
specifications can be mounted on the spindle with suitable adaptors.
15. Bellows – The Y axis ball screw is protected from chips and coolant by industrial bellows.
16. Mounting Points – There are six mounting points on the NM-200 Bed Mill. The mounting points
are M10 holes located at each corner of the machine and one in the middle of each side of the
machine. Make sure that your machine is properly mounted before operating it.
17. Proximity Switches – A switch is located on each axis of travel. These switches are the
mechanical end position limits and they also are used to home the slides.
10
11 12
13
14
15
16
21
20
17