© NovaCHARGE 2019 - All Rights Reserved
13
NC7000 Installation Manual
12
4.6 Reassemble top cover. Please refer to the following torque. This is a critical step, as
proper torqueing of these screws is necessary to ensure the front cover enables a
weather and moisture resistant fit.
2.6 Holster Installation
NOTE: If mounting onto a NovaCHARGE Universal Pedestal, please follow the
instructions that accompanied with the pedestal.
1. Separate the holster from the hook.
Figure 2-11 Separate the holster
2. Fasten the hook on the wall (or pedestal) with appropriate screws.
• For finished walls supported by wood studs use #12 tapping screws (x2).
• The recommended torque is 25 kgf.cm (21.7 lb-in).
Figure 2-12 Secure the hook
Screw
Torque
M4
16 kgf.cm
13.88 lb-in
3. Make the holster face up and combine with the hook.
Figure 2-13 Secure the holster
4. Completely rotate the holster into place.
Figure 2-14 Rotate the holster
