NovaCHARGE NC7000 Series Скачать руководство пользователя страница 3

© NovaCHARGE 2019 - All Rights Reserved

NC7000 Installation Manual

WARNING: RISK OF ELECTRIC SHOCK
 Basic precautions should always be followed when using electrical prod-
ucts, including the following:

•  Read all the instructions before using this product.
•  This charger should be supervised when used around children.
•  Do not put fingers into the EV connector.
•   Do not use this product if the flexible power cord or EV cable is 

frayed, has broken insulation, or any other signs of damage.

•   Do not use this product if the enclosure or EV connector are bro-

ken, cracked, open, or if they show any other damage.

WARNING: RISK OF ELECTRIC SHOCK
Improper connection of the equipment grounding conductor can result in 
a risk of electric shock. Check with a qualified electrician or serviceman if 
you are in doubt as to whether the product is properly grounded.

WARNING: RISK OF ELECTRIC SHOCK

•  Do not touch live electrical parts.
•  Incorrect connections may cause electric shock.

WARNING: This equipment is intended only for charging vehicles that do 
not require ventilation during charging. Please refer to your vehicle owner’s 
manual to determine ventilation requirements.

WARNING: Do not use extender cables to increase the length of the 
charging cable. Maximum length is limited to 25 feet by the National Fire 
Protection Agency.

WARNING: Do not drag the NC7000 series charger by the input power 
cord.

SAVE THESE INSTRUCTIONS

CONTENTS

1  

Introduction ..........................................................................................................................2

1.1 

Product View ........................................................................................................................2

Installation .............................................................................................................................4

2.1 

Before Installation ..............................................................................................................4

2.2 

Tools & Parts Required for Installation .......................................................................5

2.3 

Mounting the Charging Station .....................................................................................6

2.4 

NC7000 Series Charger Installation with NEMA 6-50 Plug .................................6

2.5 

NC7000 Series Charger Hardwire Installation ..........................................................9

2.6 

Holster Installation ............................................................................................................12

Содержание NC7000 Series












Отзывы: