NOVA3D ELFIN, Руководство пользователя

Страница: 37 / 57

深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
36
Umbrella-shaped support
： ①
top multi-point: Hold down “shift” to select the point where
you want to add support (2 points or more), and finally release shift when you select the drop
point.
②
point-to point: Hold down “shift” to select one point where you want to add support,
and finally release the shift when you select the drop point. Set the support top and bottom
radius and support height.
Before the support is added, the adjustment of the position and angle of the model is very
helpful for printing. Generally follow the principle of heavy head down, because it is printed
from bottom to top layer by layer, which can provide better support against gravity.
Principles
：
Theory one: Theoretically, any angle layout model can be successfully printed by adding
support.
Theory two: Choose the optimal layout direction and angle.
Theory three: In some cases, there is no need to add support.
Theory four: Support to the lowest point part of the model is a must.
Theory five: If the upper part is continuous and the slope is large, support is only needed at the
lowest point part, the upper part does not need to be supported.
Theory six: Overall stress of the model should be taken into consideration while determining
how many support to add.
4
．
Slice Configuration
The .slc file does not need to be sliced and can be directly uploaded to print. The .stl file
needs to be added with support, sliced, and then uploaded for printing. NovaMaker is the only
slicing software for Nova3D printers. If you use other software to add support, you need to
export the model to a file in .stl format and then import it into NovaMaker software for slicing.
4.1
．
Set Printing Parameters