Nova NovaBox, Руководство пользователя

Страница: 32 / 48

8
CONNECTING UP
CONNECTING YOUR SET-TOP BOX
Before starting, choose a suitable position for your
set-top box, observing the ventilation requirements
set out on page 3 .
WARNING: Before you connect or disconnect
your set-top box to/from any other equipment,
make sure you disconnect all the equipment
from the mains supply.
CONNECTING TO A TV
If your HD TV has HDMI inputs, you can connect
your set-top box to your TV using the standard
HDMI cable (see the first picture on page 9) . This will
give you the best picture and audio quality on your
TV . Note that the HD TV used for HDMI connection
must be HDCP compliant .
If you have a TV with only a composite (CVBS)
video input, use AV phono leads (not supplied) to
connect your set-top box . Match the colours of
the connectors on your set-top box and leads (see
the second picture on page 9) . You also need to
connect the audio leads (not supplied) .
For the HDMI connection, you do not need to
connect any additional audio leads .
ALTERNATIVE AUDIO CONNECTIONS
You can connect your set-top box’s audio outputs
to your TV, but you can, instead, connect them to a
hi-fi amplifier or home theatre system . This will give
better sound quality .
The best sound quality is from your set-top box’s
OPTICAL connector, but for this you will need a
75-ohm optical S/PDIF cable (not supplied) . This
digital audio is compatible with Dolby Digital audio
equipment .
WARNING: The satellite dish should be
installed by an authorised installer.
Connect the coaxial cable from your satellite dish
to the SAT IN connector on the rear panel of your
set-top box . Connect the cable from your terrestrial
antenna to the RF IN connector on the rear panel of
your set-top box .
The signal cable coming from the dish cannot
be used with a signal splitter . Using a splitter will
reduce the signal strength to your set-top box and
will damage any other set-top box connected to the
same dish .
Please ensure that the signal cable is properly
installed while setting up your set-top box .
CONNECTING TO THE
POWER SUPPLY
Your box is designed for use only with the supplied
12V power-supply adapter . The 12V power-supply
adapter operates with a 220-240V AC, 50 Hz mains
supply . Do not connect it to any other electricity
supply than this .
1 . Connect the 12V power-supply adapter to the
Power In connector on your set-top box .
2 . Connect the other end of the 12V power-supply
adapter to the mains wall-socket . If there is a
switch by the mains wall-socket, switch it on .
3 . Connect other equipment, such as your TV, to
the mains supply .
CONNECTING TO THE
SATELLITE DISH / ANTENNA