NOUVOLED VELA 250B, Руководство пользователя

Страница: 3 / 15

1.1
Notes and Installation Notes and Installation
Thank you for choosing our company's products! This product has good
performance and complete packaging when it leaves the factory. For your safe
and effective use of this product, please read this instruction manual carefully
and completely before you use this product. This manual contains important
information for installation and use. Please install and operate in accordance
with the requirements of the manual. At the same time, please keep this
manual properly for use at any time. Our company does not assume all
responsibility for damage to lamps or other performance due to personal
failure to follow the instructions during installation, use, and maintenance.
This manual is subject to technical changes without notice
。
⚫
Maintenance
⚫
Please disconnect the power before performing maintenance
。
⚫
The lamp should be kept dry and avoid working in a humid environment
。
⚫
Intermittent use will effectively extend the life of the lamp
。
⚫
In order to obtain good ventilation and lighting effects, it is necessary to
clean the fan, fan net and lens frequently
。
⚫
Do not wipe the lamp housing with organic solvents such as alcohol to
avoid damage
。
⚫
Product precautions
⚫
This lamp is for professional use only.
⚫
Before operation, make sure that the power supply voltage matches the
power supply voltage required by the equipment.
⚫
Do not place the product in a place that is easy to loose or shake.
⚫
Stop using the lamp in time if the lamp is abnormal during use.
⚫
In order to ensure the service life of the product, this product must not be
placed in a humid or leaking place, and it must not be used in an
environment where the temperature exceeds 60 degrees.
⚫
When the bulb is in use, the power supply voltage should not change more
than ±10%. Too high voltage will shorten the life of the bulb, and too low
voltage will affect the light color of the bulb.
⚫
After the power is cut off, it takes 20 minutes before the lamp is fully cooled
before being powered on again.
⚫
The rotating parts of the lamp and the pasted accessories must be
checked regularly. If there is any looseness, the shaking should be
reinforced in time to prevent accidents.
⚫
To ensure the normal use of this product, please read this manual
carefully
。
⚫
1.2 Product introduction
⚫
Light source power: 250W;