Nottrot N-LINE, Руководство пользователя

Страница: 10 / 30

P 10 / 30
N-LINE OWNERS MANUAL
9.2 Connecting the monitor to power and video source
The picture above shows all connection on the I/O Bracket. For display-units with diagonal up to 12.1” the external DC-power
connector counts only 2 pins, + and – :
Make sure all connects are firmly fixed to the unit before powering up. For details regarding pin layouts, please refer to the
chapter “Pinning”.
Connect the unit to ground using the M4 screw in the I/O section marked with the grounding symbol:
9.3 Front controls
Depending on the model you have chosen, the following controls can be found at the front side of the unit:
OSD MENU Description OSD MENU Description
Dim knob Dimming knob
1. Potentiometer for backlight brightness: rotate CW to increase and CCW
to decrease
2. Multifunction knob:
o
rotate CW to increase and CCW to decrease
o
Push for standby-modus (power ON/OFF)
Capacitive switch for ‘Source select’ Touching the glass at the symbol will select the next video-input. In the OSD menu
you can switch unused sources to OFF to avoid scrolling through unused sources.
The status-LED next to the source select symbol shows:

Green: source is available

Red: no valid source at selected input
The status-LED is dimmed simultaneously with the backlight.
9.4 Setup for Operation (OSD-menu)
The OSD (On Screen Display) provides certain functions to have clear image and others.
This monitor supports 5 buttons OSD Menu operation as a standard.
The status-LED gives information about the signal status: Green
IEC