N-COM Setup manual
3
Revision history
Before installation or using the monitor make sure you have the latest version of this owners manual.
Version
Remark
NCOM_Setup_V1.0
Initial manual
NCOM_Setup_V1.01 Minor corrections
NCOM_Setup_V1.02 OSD > Push&hold functions added
NCOM_Setup_V1.03 Protocol description
About this manual
The N-COM is a dimming control system designed for the Nottrot N-Line models. Since all models are built using the same
concept (similar components), all data has been collected to create one manual that describes the entire series.
This document contains technical and users information about the dimming system and must be used with the manual of your
type of monitor, like N-Line. Please make sure you are using the latest version of this manual when installing the product.
Although we strive to be as complete as possible, there will always be additions made. All updates of this document are subject
to change without notice. The revision history is shown in chapter 1.
Disclaimer
Nottrot BV makes no representations or warranties, either expressed or implied, with respect to the contents hereof and
specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, Nottrot BV reserves the right
to revise this publication and to make changes from time to time in the contents hereof without obligation of Nottrot BV to
notify any person of such revision or changes. Please follow these safety instructions for best performance, and long life for your
monitor
Copyright © 2021 by Nottrot BV. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Nottrot BV.
1
Introduction
N-Com is an advanced dimming system on the N-Line. This digital system can be used for controling various functions like OSD-
control and dimming of your LCD monitor. N-Com also makes it possible to interconnect upto 18 monitors for central dimming
and (basic) control. The units will be addressed automatically.
➔
With the N-COM application software you are able to set all kinds of parameters descibed in this manual.
The advantage of the N-Com with LIN-Bus and RS485 is the supported long cable length. It supports auto-addressing and
patching of any dimming control-unit to any other monitor.
Safety precautions
•
Consider this document as a addendum on the N-Line monitor manual.
•
Remove power before (dis)connecting any cables to the monitor
•
Connecting the RS485 (LAN/CAT5) cable to a computernetwork may result in damage to the devices on the network and
the monitor.
•
The cover glass or touch sensor is made of regular (or hardened) glass. This can be scratched or even broken in pieces by
hitting it
•
In case of trouble contact your supplier. Service should only be done by qualified personal
•
Never open the chassis. There are no user-serviceable parts inside.
•
Never place any parts of the monitor system near warm objects like heaters or in direct sunlight.
•
Keep all parts dry to avoid short circuit. Make sure no fluids can enter the units through any ventilation gaps.
•
Wait for at least 6 seconds after switching power off before removing the cables.
•
Make sure the temperatures do not exceed max values when storing or using the display.
•
Never expose the unit to strong vibrations during transport and use.
Содержание N-COM
Страница 26: ...N COM Setup manual 26 ...
