Notifier NFS-3030/E, Руководство по программированию

Страница: 30 / 144

Program Panel Program Menu (2)
30 NFS-3030 Programming Manual P/N 51345:C 11/4/03
Remote Display Point Programming
Figure 3.16 Remote Display Point Programming Screen
Soft Keys
DISPLAY POINT: Press this soft key to bring the cursor to the underlined field. Use the keypad to
type in the desired display address.
POINT LABEL: Press this soft key to bring the cursor to the underlined label field. Type in a label
of up to 40 characters that will appear in trouble messages.
LOCAL CONTROL:
Press to toggle between
YES
and
NO
. A setting of
YES
enables local control at
the remote display.
3.3.4 Loop Configuration
This screen displays when the
LOOP CONFIGURATION
soft key is pressed at the Panel
Programming Menu 2 screen. Here the programmer chooses one of the ten possible SLC loops for
further definition.
Figure 3.17 Loop Configuration Screen
R E M O T E D I S P L A Y M E N U
D I S P L A Y A D D R E S S
D 0 1
P O I N T L A B E L
E A S T W I N G H A L L W A Y
L O C A L C O N T R O L : Y E S
N E X T S E L E C T I O N A C C E P T
P R E V I O U S S E L E C T I O N B A C K
L O O P C O N F I G U R A T I O N
P O I N T S E L E C T :
L y y ( L O O P )
N E X T S E L E C T I O N A C C E P T
P R E V I O U S S E L E C T I O N B A C K
www.PDF-Zoo.com