NCM Installation PN 51533:A1 03/27/03
5
4 Door-Mounting
Both NCM-W and NCM-F can be installed in any panel circuit module position; see your control panel
installation manual. Additionally, the NCM-W can be door-mounted on the ADP-4B Dress Panel on a
single-space blank plate (BMP-1) for mounting in a CAB-4 Series cabinet.
Note:
The module cannot be mounted in the ADP-4B Dress Panel when a front slot of the CHS-4 or
CHS-4N is occupied, or when either of the two front right positions of the CHS-M2 is occupied.
Always be certain there is enough clearance to close the cabinet door when this installation is used.
5 Supplemental Documentation
The table below provides a list of document sources (manuals) containing additional information
regarding the NCM and products that it can connect to. The NOTIFIER document (DOC-NOT) chart
provides the current document revision.
Table 4 Supplemental Documentation
Note:
For module mounting instructions, refer to the documentation for your control panel
Mount a single-space blank
plate onto the ADP-4B Dress
Panel.
Single-space
blank plate
Fasten module to the plate
with four screws (included).
For information on…
Refer to…
Part No.
Networking
NOTI•FIRE•NET™
Manual (for Network Version 4.0 and Higher)
Onyx NCS Network Control Station (for Network Version 4.0 and Higher)
NCS Network Control Station (for Network Version 4.0)
NFS-640 Installation
Operations
Programming
NCA Network Control Annunciator
Media Interface Board (MIB) Manual
NAM-232 Network Adaptor Module
RPT - W/WF/F Repeaters for
NOTI•FIRE•NET™
51584
51658
51585
51332
51333
51334
51482
50255
50038
50256
Off-line Programming Utility
VeriFire™ Tools CD on-line help file
VeriFire-TCD
Compatible Devices
Device Compatibility Document
15378
Cabinets & Chassis
CAB-3/CAB-4 Series Installation Document
BMP-1 Product Installation Document
Also see your panel’s Installation Manual
15330
51119
ADP
4
-d
oo
r-mo
d
ule
.c
dr
