Notifier LCD2-80 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 24

Notifier LCD2-80 Скачать руководство пользователя страница 4

4

LCD2-80 Instruction Manual —

P/N 53242:B1 10/25/2012

Software Downloads

In order to supply the latest features and functionality in fire alarm and life safety
technology to our customers, we make frequent upgrades to the embedded software in our
products. To ensure that you are installing and programming the latest features, we
strongly recommend that you download the most current version of software for each
product prior to commissioning any system. Contact Technical Support with any
questions about software and the appropriate version for a specific application.

Documentation Feedback

Your feedback helps us keep our documentation up-to-date and accurate. If you have any
comments or suggestions about our online Help or printed manuals, you can email us.
Please include the following information:

• Product name and version number (if applicable)
• Printed manual or online Help
• Topic Title (for online Help)
• Page number (for printed manual)
• Brief description of content you think should be improved or corrected
• Your suggestion for how to correct/improve documentation

Send email messages to:

[email protected]

Please note this email address is for documentation feedback only. If you have any
technical issues, please contact Technical Services.

«
...
2
3
4
5
6
...
»

Содержание LCD2-80

























Отзывы:

Нет отзывов