25
BACnet Gateway-3 Installation and Operation Manual - P/N: 53372:Rev: A 5/6/09
Section 3 BACnet GW-3 Configuration and Operation
3.1 BACnet GW-3 Configuration
3.1.1 BACnet GW-3 Configuration Overview
Perform the gateway configuration in this order:
•
“BACNet Gateway Configuration Tool Installation” on page 25
•
“Connect the Configuration Computer to the BACnet GW-3” on page 26
•
“Prepare the Configuration Computer to Communicate with BACnet GW-3” on page 26
•
“Log into the BACnet GW-3 for Configuration” on page 27
•
“Configure the BACnet GW-3” on page 28
•
“Connect the BACnet GW-3 to the NFN Network or FACP” on page 33
3.1.2 BACNet Gateway Configuration Tool Installation
The BACNet Gateway Configuration Tool CD-ROM is provided when the gateway is ordered.
Use these steps as guideline to install the application onto the computer that has Windows 2000 or
XP installed.
Step 1. Insert the CD-ROM into the CD-ROM drive on the computer that will be connected to the
gateway so the gateway can be configured.
Step 2. From Windows Explorer or the Run command, select and start the setup.exe file that is
located in the CD-ROM’s root directory. The installation program starts.
Step 3. Follow the displayed instructions to install the BACNet Gateway Configuration Tool.
!
CAUTION:
Different sources of power are used in conjunction with this product
.
Disconnect all sources of power
before servicing
.
This device and associated equipment may be damaged by removing and/or inserting
cards, modules or interconnecting cables while this unit is powered
.
This damage may adversely affect
the operation of this unit, but its effect may not be readily apparent.
