Page of 5
4
STEP 4
Add a laminate shelf to the level previously built level, then continue by adding the fourth and
fifth level to the unit using two (2) beams and two (2) braces per level. Tap lightly to properly seat
the rivets and add the final laminate shelves to the unit. Optional anchor hardware is supplied
with this unit so the unit can be fastened to a wall if necessary. See instructions for installing
anchor hardware.
Anchor Hardware Instructions
Wood Stud Installation-
Drill an applicable small pilot hole even with the hole of the post into
the wood stud. Use a drill or screwdriver, and fasten the screw and washer through the hole of
the post, and into the wood stud.
Wall Board Installation-
Drill an applicable hole even with the hole of the post into the wall
board. Insert the wall anchor into the wall board. Use a drill or screw driver, and fasten the screw
and washer through the hole of the post, and into the wall anchor.
