background image

Page 34 of 35 

 

Limited Warranty 

The 20 HP Mini-Track Gas Loader 

is sold by NorTrac; a division of Northern Tool & Equipment 

Company, Inc. (NTE). NorTrac will repair or replace, at its option, any part(s) thereof of the NorTrac 
20 HP Mini-Track Gas Loader that are shown to be defective in material and/or workmanship, under 
normal use during the applicable 24-month warranty period. NorTrac wants your equipment to operate 
well and will assist you on repairs. 

All warranty repairs submitted after the first 60 days of 

ownership are subject to a $100.00 labor deductible, per covered repair. 

After the labor 

deductible has been met, all warranty repairs and replacements will be made without charge for parts 
or labor at a pre-authorized service center. All parts replaced as a result of this limited warranty 
become the property of NorTrac and must be returned to NTE upon request. All parts replaced will 
become a portion of the whole and will be warranted for the duration of the original equipment 
warranty.  

Length of Warranty 

The limited warranty begins on the original date of purchase and extends to 24 months for consumer 
household use. For the commercial end user, the limited warranty continues for 6 months (180) days 
from date of original purchase. Commercial use is defined as: intended for the purpose of monetary 
reward or gain through the loan, rental or hire of equipment - OR- any manner that is primarily 
intended for or direc

ted toward commercial advantage “For Profit” or private monetary compensation, 

or use by any governmental agency.  

Qualifications for Limited Warranty 

This applies to the original purchaser of the equipment. The limited warranty is non-transferable. 
Owner is to provide proof of purchase. Equipment was purchased in the United States from 
authorized representatives of NorTrac and/or NTE, Company, Inc. 

To Obtain Service 

Contact NorTrac Warranty Administrator by calling 1-800-521-0438 to report a possible warranty 
issue and to receive repair authorization from the Warranty Administrator. Detailed failure information 
can also be provided in hard-copy written form along with contact information to the address listed at 
the bottom of this page.  
After receiving authorization from NorTrac Warranty Administrator, and the address of the pre-
authorized service center, take the equipment to the service center during their regular business 
hours. 

All transportation costs after the first 60 days of ownership, are the responsibility of the 

equipment owner.  
Exclusions and Warranty Disclaimers 

This limited warranty applies to equipment used in its original form. Any unauthorized modifications or 
any incorporation or use of unsuitable attachments or parts will automatically void this limited warranty. 
This limited warranty does not include parts affected or damaged by accident and/or collision, normal 
wear & tear (light bulbs, filters, belts, motor brushes, brakes, fuses and switches, tires and tubes, 
clutch linings, engine tune up, wheel alignment and lubrication), fuel contamination, or from failure to 
follow instructions contained in the User Manual for the equipment. Warranty is void if adjustments are 
made to the injection pump fuel delivery system, starting fluid or ether is used to start or run the 
engine or regular maintenance and service is not performed as prescribed by the operator’s manual 
during the warranty term. The cost of normal maintenance of the equipment is the responsibility of the 
owner.  

Limited Warranty 

 

This limited warranty does not cover defects that result from accident, misuse, lack of maintenance, 
improper repairs, neglect or use of replacement parts and accessories which do not meet NorTrac 
specifications.  

Disclaimer of Consequential Damage

 

Any implied warranty of merchantability or fitness for a particular purpose, to the extent that either 
may apply to any NorTrac TM tractor or crawler / bulldozer, shall be limited in duration to the periods 
of the express warranties shown above, and to the extent permitted by law any and all implied 
warranties are excluded. In no event will NorTrac or NTE Company, Inc. be liable for any loss of 
income, loss of time or use of the product, transportation, hiring of alternative services, commercial 
loss or any other incidental, consequential, or special damages and / or expenses. Some states do 
not allow limitations on how long an implied warranty lasts and / or do not allow the exclusion or 
limitation of incidental or consequential damages, so the above exclusions and limitations may not 
apply to you. This limited warranty gives you specific legal rights which may vary from state to state.  

Содержание 20 HP Mini-Track Gas Loader




































Отзывы: