4
2)
3) Assembly
Brief summary of the steps
:
1. Insert bow and stern elements into the hull and clip 2 keel rods onto each of them.
2. Tense the keel while connecting the rods in the middle .
3.
Install all cross ribs
(for each seat: there is always an open cross rib in the front and a closed
one at the back)
4. Inflate the sponsons.
Every step is detailed in the following instructions.
Prior information:
Scubi 2 XL
is supplied with “foam pads“. They are placed along the keel into a channel in the hull. It is
an extra protection for the hull, in addition to reinforcement strips already present on the outside of the
hull.
These foam pads are usually already in place on a new boat.
They can remain in place while
assembling/disassembling the boat.
You may want to take them out in order to rinse
the channel for instance. The insertion and the
removal of the foam pads is easy thanks to the
wide round holes along the channel.
First unfold the hull.
Take the
bow
segment
And the
keel rod #1
(arrow ahead pointing towards bow).
Foam Pad
