27
First assemble the 2 parts of the mast.
The shrouds are attached to the lower part of the
mast. There is a mounting tip at the lower end of
the mast.
Insert the mast
first through the clip
and then
into the sleeve of the sail.
Before assembling your kayak
, place the
supporting bar and plate on the bow element. It
will support the mast from below.
Thread the supporting bar on the bow element
until the clip.
Screw it tightly and place the supporting plate.
This mechanism is used to transfer the weight of
the mast onto the keel.
You can leave the supporting bar in place when
disassembling. You should only remove the
plate.
Open the velcro flaps at the bow.