08099A-1 14
TELEPHONE OPERATION
TO PLACE A CALL IN TALK MODE
1. Press the TALK button on the handset. The LCD Display will show "TALK" and the symbol will
flash while the unit auto-
scans and will
light steadily when it finds a clear channel.
(Figure 16)
The [M] symbol means that the volume level is medium.
2. Listen for a dial tone.
3. Dial the telephone number. The phone numbers appear on the LCD Display as you enter the number.
4. When finished with your call, press the TALK button or place the handset on the base unit.
TO PLACE A CALL IN STANDBY MODE (PREDIAL MODE)
1.
Ensure that the unit is in standby mode. The handset and base unit IN USE LED indicator is off.
2.
Dial the telephone number or press RE / PA button. If you make a mistake, press
button to delete the character on the left of the cursor.
3.
Press C. BACK button.
4.
When finished with your call, press the TALK button or place the handset on the base unit.
TO RECEIVE A CALL
NOTE:
If you are expecting incoming calls, the handset must be programmed to RING ON mode. See PROGRAMMING MODE
section.
A.
IF THE HANDSET IS ON THE BASE UNIT
1.
Since the Excursion 39705 features ”Auto-Answer”, simply pick up the handset from the base cradle when the phone rings. The
LCD Display will show " TALK" and the symbol
will light steadily.
2.
Start your conversation.
3.
To end your conversation, either press the TALK button or place the handset on the base unit.
B.
IF THE HANDSET IS OUT OF THE BASE UNIT
1.
When the phone rings, press the TALK button on the handset. The LCD Display will show "TALK" and the symbol will light
steadily.
2.
Start your conversation.
3.
To end your conversation, either press the TALK button or place the handset on the base unit.
LAST NUMBER REDIAL
A.
AFTER HEARING A BUSY TONE WHEN PLACING A CALL
1. If you get a busy tone, press handset TALK button to hang up.
2. Press the handset TALK button again and listen for a dial tone.
3. Press the handset RE / PA button. This will automatically redial the last telephone number you called (Up to 31 digits).
B.
WHEN THE HANDSET IS OFF THE BASE UNIT AND IN STANDBY MODE
1. Press the TALK button on the handset and listen for a dial tone.
2.
Press the RE / PA button. This will automatically redial the last telephone number you called (Up to 31 digits).
STORING TELEPHONE NUMBERS INTO MEMORY DIALING DIRECTORY
In addition to your Call Records, you can store up to 20 speed dial names and telephone numbers into memory and you can then dial
any of the stored phone numbers. You can also transfer a Call Record into the Memory Dialing Directory.
A.
STORING TELEPHONE NUMBERS INTO MEMORY
1. Make sure that the handset is in the standby mode. The base and handset IN USE LED indicator should be off.
2. Press and release the MEMO button. The handset will beep once.
3. Press the (+) or (-) button to locate an available location or enter a memory location. There are 20 memory locations available.
Memory location below 10 needs a leading zero such as 01, 02 to 09. If the memory location is available, the LCD panel shows
the memory location number and the "EMPTY" message. The flashing line or cursor indicates that the phone is ready for data
entry.
4. Enter the name, character by character. You can enter up to 15 characters. Locate the character on the keypads 2 through 9.
Press once to enter the first character, twice for the second character, etc. Use or button to move the cursor back and
forth through the name entry line. To create a space between characters and words, press the button twice after the
last entered character.
NAME ENTRY TABLE
Key
1
st
2
nd
3
rd
4
th
5
th
1
&
(
)
1
space
2
A
B
C
2
3
D
E
F
3
4
G
H
I
4
5
J
K
L
5
6
M
N
O
6
7
P
Q
R
S
7
8
T
U
V
8
