Uninstalling the Wall Mount Bracket
To remove the wall mount bracket from the base unit, pull it front as shown in Figure 5.
(Figure 5)
POWER CONNECTION
CAUTION: You must use a Class II, 120 Volt AC/6 Volt DC adaptor that delivers at least 250mA.
The center tip must be positive and the plug must correctly fit the unit's DC 6V jack.
1. Plug the AC adaptor into a standard AC outlet.
2. Insert the small plug inot the DC 6 jack on the rear of the base unit as shown in Figure 6.
Telephone Line Jack
DC 6V Jack
AC Adaptor Plug
6VDC Adaptor
(Figure 6)
HEADSET CONNECTION
One of the special features of your phone is that your handset could utilize a headset(not included) for
hands-free communication. Insert the small plug at the end of your headset cord to the headset jack at the
side of the handset as shown in Figure 7. Follow the procedures discussed in "Placing a Call" when to
place and receive a call.
Note: The headset jack of your cordless telephone is compatible with 2.5mm headset plugs only. When
you plug in the headset into the headset jack, it automatically mutes the microphone and speaker of the
handset. Unplug the headset to return the handset to normal use.
Handset Jack
(Figure 7)
041505 A-