Northwestern Bell Big Button Plus 20270, Руководство пользователя

Страница: 14 / 18

13 010508A-1
(Fire) (Hospital) (Police)
6. Replace the handset to the base.
NOTE: If the line power is lost for a
few hours, phone numbers stored in
MEMORY are not lost. The Big Button
Plus
20270 will retain the programmed
numbers.
IMPORTANT: When programming
emergency numbers and/or making test
calls to emergency numbers:
1. Remain on the line and briefly explain
to the dispatcher the reason for the call
before hanging up.
2. Perform such activities during off-
peak hours such as early morning or
late evening.
To Dial an Emergency Number
1. Lift the handset and listen for a dial
tone.
2. Press the desired button. The
number stored in that button's
memory location will be dialed.
To program 10 frequently called
phone numbers
1. Pick up the handset (or activate the
speakerphone).
2. Press and release the store button.
3. Enter the phone number (up to 16
digits).
4. Press and release the store button.
5. Press location number (0-9) where
you want to stored
6. To store more phone numbers or
modify existing numbers in memory,
repeat steps 1-5 .
Recalling Stored Numbers From Two
Touch Memory
1. Pick up the handset and listen for a
dial tone.
2. Press the MEMO button.
3. Press the corresponding memory
location key (0 - 9). The stored
telephone number will be dialed out
automatically.
Transfer and Store Phone Numbers
from an In-Coming Call (70 Calls) to
Memory Locations (01-10).
1. On-Hook state.
2. Press the Review UP or DOWN
button to select the desired call.
3. Press the STORE button.
4. Press the desired emergency button
or 10 two-touch memory locations.
5. To transfer and store more phone
numbers in memory, repeat steps
1-4.
NOTE: Number stored previously in
the selected location will be replaced by
the one recently stored. To prevent
number from being deleted accidentally.
You are advised to view the memory
location (01-10) record before storing
the number.
Viewing the Stored Number (one-
touch)
1. On-Hook State.
2. Press the desired three emergency
numbers button.
3. The pre-stored phone number and
location number will display. If no
number was previously stored, the
display shows only the location
number.
Viewing the Stored Number (two-
touch)
1. On-Hook State.
2. Press the MEMO button.
3. Press the desired location number
button (0-9).
4. The pre-stored phone number and
location number will display. If no
number was previously stored, the
display shows only the location
number.
GLOSSARY OF TERMS