11159A-1
12
OWNER’S MANUAL #
PAGE #
transmission. This is not the fault of
your Caller ID unit. It can only capture
and store the data that was received.
•
If a line error is detected in the
transmission, the LCD panel will
display “
LINE ERROR
”.
TELEPHONE OPERATION
Dialing Mode (PULSE/TONE Switch)
•
If your home is equipped with
touch-tone dialing service, set the
PULSE/TONE switch to TONE
position.
•
If you have a pulse (rotary) dialing
service, set the PULSE/TONE
switch to PULSE position.
Pulse>Tone (Mixed Mode) Dialing
If you only have pulse (rotary dialing)
service in your area and want to access
tone dialing services, set the
TONE/PULSE switch to the PULSE
position. Dial the desired number and
when tone signals are required press the
TONE button once. Subsequent digits
will be dialed in tone mode. Dialing will
be reset to Pulse mode when handset is
returned on-hook.
Placing a Call
Lift the handset or press the
SPEAKERPHONE button and listen
for a dial tone. Dial the desired phone
number.
NOTE:
If you do not hear a dial tone
after pressing the SPEAKERPHONE
button, adjust the VOLUME control
located on the right hand side of the
Easy Touch® II 76510.
Receiving a Call
When the phone rings, lift the handset or
press the SPEAKERPHONE button, and
start conversation with the caller. The
SPEAKERPHONE LED Indicator will
light up solid after the
SPEAKERPHONE button is pressed.
NOTE:
If you cannot hear the caller,
adjust the VOLUME control to a desired
listening level. If the callers cannot hear
you, speak closer to the base unit.
Ending a Call
Upon completion of a call, you can hang
up the Easy Touch® II 76510 by
returning the handset back into the
handset cradle on the base, or by
pressing the SPEAKERPHONE button
(If the speakerphone mode was initiated)
Last Number Redial
The last number redial feature may be
used to dial the last number called (up to
32 digits).
1. Pick up the handset or press the
SPEAKERPHONE button and listen
for a dial tone.
2. Depress the REDIAL button. The
phone number dialed last will be
dialed out automatically.
Flash
Pressing this button momentarily hangs
up the phone to access custom calling
features such as Call Waiting or Three-
Way Calling provided by your local
phone company. For other Custom
Calling features, refer to the instructions
provided by your local phone company.
NOTE:
If the phone is in speakerphone
mode and the caller is put on hold, the
SPEAKERPHONE LED will turn off.
This does not mean that the caller is
disconnected; the caller is only put on
hold.
Redial/P
When the line is busy hang up the
phone, then lift the handset press this
button and it will automatically dial the
last number called. Also press this
button to insert a 4-second delay
between dialed numbers in a PABX
system or long distance services.
