Tighten the adjuster bolts the
same amount, to take slack
out of transmission chain.
This will move the engine
plate back.
Then tighten the handle bolt
and forward bolt securely.
After adjusting drive chains,
adjust chain between
transmission and differential.
Loosen forward bolt, located on
the inside of the frame in front
of engine plate
Loosen handle bolt
Top view of adjuster bolt.
Maintenance Notes:
Chain size #40
Zirk fittings on pillow blocks need grease
once a year;
Change and check oil per engine manual.
5 Speed transmissions is sealed…no
lubricating required
Feel free to run 100 LL in your engine.
3-2006
