background image

Tent appears as shown.

Disassembly

1) To take down the tent, disassemble in 
     reverse order.
2) Remove accessories.
3) Remove and fold fly.
4) Be sure to leave doors and windows 
     unzipped to avoid zipper damage.
5) Remove stakes with hammer or stake 
     puller. DO NOT pull on tent.
6) Carefully disengage poles from pins. Push 
     poles away from you through the sleeves 
     to minimize risk of damage to tent or poles.
7) Keep poles and stakes together in bags 
     provided.

Packing the tent

1) Spread tent flat, distribute evenly. 
2) Fold into quarters not to exceed the length 
     of pole bag.

3) Lay pole bag at opposite end from door. 
     Tightly roll bag, skin and fly forcing air 
     through unzipped door.

4) Secure with ties and place in carry bag with 
     stakes and accessories.
5) Tent must be clean and dry before storage. 
     Store off concrete floor.

Be certain campfires are extinguished. 

Dispose of trash appropriately.

Dimension A should
be close to but not
exceed the length
of the pole bag.

A

Fold tent into a

rectangular shape.

Front of tent

(door unzipped)

Step 9: 

Fully assembled

Note: Interior accessories with this model 
can be attached to loops inside the tent.

Step 8: Secure guy Lines

1) Secure shower tent using all guy lines and 
     stakes. Shower tent must be secured for 
     proper function.

Step 6: Position fly

1) Unfold the fly and stretch out all corners.
     Place the fly over the shower tent.

Step 7: 

Fasten the fly

1) Attach the fly to the shower tent by 
     hooking the plastic s-hooks at the fly 
     corners to the rings on the leg poles.

2)  Wrap the hook and loop fasteners, sewn on 
      the underside of the fly, around the leg 
      poles.

Step 5: Body assembled

Tent appears as shown.

Step 4: Stake tent, 

fasten hooks

1) Stake down the shower tent by inserting a 
     stake through the stake loops, located 
     along the perimeter of the shower tent.
2) Make certain the tent floor is pulled out
     evenly and tightly.
3) Hammer the stakes into the ground at a
     45

0

 angle using a hammer or mallet.

4) Clip the plastic hooks on the side of the tent 
     to the leg poles.

KMT160704SW  11/15

Содержание KMT160704SW

Страница 1: ...nopy DO Always extinguish campfire before sleeping or leaving the area Exercise care when using electricity and lighting Make certain it is properly ventilated in all weather conditions In extreme weather conditions snow could obstruct airflow and cause asphyxiation Clear frequently Anchor securely to provide additional security in changing climatic conditions Snow pegs skis and or heavy rocks may...

Страница 2: ...ns A 2 each Main B 1 each Middle Roof C 4 each Corner Leg Tent 1 each Rainfly 1 each Hanging Shelf 1 each Step 2 Spread tent and insert roof poles 1 Spread out the tent flat floor side down 2 Use the illustration below as a guide Insert the main roof poles A through the pole sleeves from corner to opposite corner The poles will cross at the center of the roof 3 Insert the middle roof pole B throug...

Страница 3: ...close to but not exceed the length of the pole bag A Fold tent into a rectangular shape Front of tent door unzipped Step 9 Fully assembled Note Interior accessories with this model can be attached to loops inside the tent Step 8 Secure guy Lines 1 Secure shower tent using all guy lines and stakes Shower tent must be secured for proper function Step 6 Position fly 1 Unfold the fly and stretch out a...

Страница 4: ...re tent screen house ONLY when thoroughly dry However if mildew occurs use a soft bristle brush or sponge with mild dishwashing soap or Fels Naptha soap to clean Let dry thoroughly and a tent approved water repellent compound may be applied For small tears use a self adhesive patch kit We recommend a canvas or awning repair shop for larger tears Zippers are self repairing If the zipper separates y...

Отзывы: