background image

KMT160704SW

ASSEMBLY INSTRUCTIONS

IMPORTANT NOTES:

* Assemble your tent before camping to become    
   familiar with the assembly.
* Two people are recommended for setup.
* Select a clean, level area for the campsite, free                      
   of debris and sharp objects, away from a  

 

   natural watercourse.
* Use of a ground cloth is recommended to
   prolong the life of the tent floor and provide
   additional insulation and moisture protection.
* To prevent damage to the zippers, unzip the
   doors and windows prior to disassembly, 

 

   allowing air to move freely.
* Seam seal the inside stitched seams of a tent.
   This will improve weather resistance. Available 
   in sporting goods departments. Discoloration
   may occur if applied to outside seams.

Verify package contents

Step 1: Assemble poles

1) Assemble fiberglass poles by inserting
     sections into the metal ferrules. Assemble 
     steel poles by inserting the tapered pole 
     ends into the adjacent sections.

(A) 2 each Main 

(B) 1 each Middle Roof 

(C) 4 each Corner Leg

Tent : 1 each

Rainfly : 1 each

Hanging Shelf : 1 each

Step 2: Spread tent and insert roof poles

1) Spread out the tent flat, floor side down.
2) Use the illustration below as a guide. Insert the main roof poles (A) through the pole sleeves,
     from corner to opposite corner. The poles will cross at the center of the roof.
3) Insert the middle roof pole (B) through the pole sleeves at the center of the roof. Place the 
      pole ends into the adjacent plastic cup.

Step 3: Attach leg poles

1) Use the illustration below as a guide. Position the 4 corner leg poles (C) at each corner and
      insert the ends of the main roof poles (A) into the tops of the corner leg poles (C). 
2) To raise the shower tent, place the bottom of the leg poles over the pin attached to the stake
      loops at the corners of the tent.
3) Clip the plastic hooks at the corners of the roof of the tent to the frame.

(A) 2 each - Main Roof
(B) 1 each - Middle Roof

Fiberglass Poles : 3 each (total)

Tent Stakes : 12 each

Divider : 1 each

(C)  4 each - Corner Leg

Steel Poles : 4 each (total)

A

A

B

C

C

C

C

A

A

B

KMT160704SW  11/15

Содержание KMT160704SW

Страница 1: ...nopy DO Always extinguish campfire before sleeping or leaving the area Exercise care when using electricity and lighting Make certain it is properly ventilated in all weather conditions In extreme weather conditions snow could obstruct airflow and cause asphyxiation Clear frequently Anchor securely to provide additional security in changing climatic conditions Snow pegs skis and or heavy rocks may...

Страница 2: ...ns A 2 each Main B 1 each Middle Roof C 4 each Corner Leg Tent 1 each Rainfly 1 each Hanging Shelf 1 each Step 2 Spread tent and insert roof poles 1 Spread out the tent flat floor side down 2 Use the illustration below as a guide Insert the main roof poles A through the pole sleeves from corner to opposite corner The poles will cross at the center of the roof 3 Insert the middle roof pole B throug...

Страница 3: ...close to but not exceed the length of the pole bag A Fold tent into a rectangular shape Front of tent door unzipped Step 9 Fully assembled Note Interior accessories with this model can be attached to loops inside the tent Step 8 Secure guy Lines 1 Secure shower tent using all guy lines and stakes Shower tent must be secured for proper function Step 6 Position fly 1 Unfold the fly and stretch out a...

Страница 4: ...re tent screen house ONLY when thoroughly dry However if mildew occurs use a soft bristle brush or sponge with mild dishwashing soap or Fels Naptha soap to clean Let dry thoroughly and a tent approved water repellent compound may be applied For small tears use a self adhesive patch kit We recommend a canvas or awning repair shop for larger tears Zippers are self repairing If the zipper separates y...

Отзывы: