Disassembly
Packing the Tent
1) To take down the tent, disassemble in
reverse order.
2) Remove accessories (if included)
3) Remove and fold fly.
4) Be sure to leave doors and windows
unzipped to avoid zipper damage.
5) Remove stakes with hammers or stake
puller. DO NOT pull on tent.
6) Carefully disengage poles from pins. Push
poles away from you through the sleeves
to minimize risk of damage to tent or poles.
7) Keep poles and stakes together in bags
provided.
3) Lay pole bag at opposite end from door.
Tightly roll bag, skin and fly forcing air
through unzipped door.
4) Secure with ties and place in carry bag with
stakes and accessories.
5) Tent must be clean and dry before storage.
Store off concrete floor.
Be certain campfires are extinguished.
Dispose of trash appropriately.
Dimension A should
be close to but not
exceed the length
of the pole bag.
A
Fold tent into a
rectangular shape.
Front of tent
(door unzipped)
1) Spread tent flat, distribute evenly.
2) Fold into quarters not to exceed the length
of pole bag.
KMT161408 12/15
Step 4: Attach Leg Poles
1) Begin on one side of the tent. With plastic mold near the top insert leg pole (C) into the
opening of the pre-attached plastic connector.
2) Carefully place the end of the leg poles onto the pins located on the stake loops at the
sides of the tent.
3) Repeat for other side of tent.
4) Tent appears as shown below.
Step 5: Attach Rain Fly
1) Position the rainfly over the frame with the awnings at the sides.
2) Begin on one side attaching hook and loop tabs on the underside of the rainfly to the
corner leg poles.
3) Insert the side fly pole (D) through the sleeve at the edge of the fly over the window.
4) Insert each pole end into the plastic molds on the leg poles (C).
5) Move to the other side attaching hook and loop tabs and install fly pole.
6) Attach s-hook on fly corners to d-ring on corner stake loops.
Step 6: Secure Guy Lines
1) Secure tent using all guy lines and stakes. Tent must be secured for proper function.
2) Mud mat may be attached using loops and stakes.
Interior accessories can be attached to loops inside the tent.
