Page 4
2.0 Remove housing from packaging
1.0 Clean outer rim and surface of motor facing
and shaft of paint, grease, dirt and other debris.
3.0 Slide housing on to motor facing.
MECHANICAL INSTALLATION
5.0 Slide Clamp wheel on to the shaft
6.0 Position the wheel such that its front surface
is flush with housing groove surface.
4.0 Tighten (2) 1/2”-13 UNC to a nominal 85
ft-lbs when cover option is PP. For other cover
options use all (4) 1/2”-13 screws
