background image

 

Northstar 

Explorer 443s/443sp

 Installation and Operation Manual

To turn the Simulation mode ON or OFF, press    
                 SETUP     highlight SIMULATE     .

Power off

To turn the fishfinder off, hold 

. A countdown 

box appears. Continue to hold 

 for three 

seconds until the fishfinder turns off.

Note: 

If the unit is wired for Auto Power (see 

section 5-4) the fishfinder can only be turned off 
when the boat’s ignition is turned off.

Language selection

To check which language is currently selected, 
press 

 to display the MAIN MENU.

Follow these steps to change the language:

1.  Power off the unit.

2.  While the unit is off, hold down the   key.

3.  Keep holding down the   key and power 

on the unit.

4.  The screen displays a list of languages. 

Press the Cursor   or   key to highlight a 
language, then press the Cursor   key to 
select it. The fishfinder will continue the 
startup sequence. 

Backlighting

Use the 

 button to adjust the backlighting to 

suit individual preferences.

Press 

 once, at any time, to see the backlight 

bar. This is displayed at the bottom of the screen 
and shows the current setting. 

Press 

 repeatedly until the desired backlighting 

level is achieved. The backlight bar will disappear 
two seconds after the last press.

An internal simulator allows users to learn how to 
operate the fishfinder off the water. 

In Simulation mode the word “SIMULATION” 
flashes on the bottom of the screen. The 
fishfinder generates data so that all the main 
screens appear to be operational. Any changes 

2-1 Simulation Mode

made to the contrast, backlighting, alarms or the 
display setup are saved. 

3 Operation

HISTORY screen (see section 3-2) 

Displays the echoes received over time, with the 
most recent events on the right of the screen. Use 
this screen when travelling to show the bottom 
so reefs, wrecks and fish can be found.

ZOOM screen  (see section 3-4) 

This screen is split into two parts. On the right 
is the Full Range Section which shows part of 
the HISTORY Screen and to the left is the Zoom 
Section. Use this screen for taking a closer look at 
interesting underwater features.

MAIN MENU screen

Northstar fishfinders are menu driven. Press 

 to display the MAIN MENU screen. 

Press   or   to 
highlight an option, 
then press   to 
select it.

The MAIN MENU 
options are 
summarized below 
and fully explained 
in the following 
sections.

Содержание EXPLORER 443S

































Отзывы: