NorthStar 490 Echosounder Скачать руководство пользователя страница 32

Страница: 32 / 76

Chapter 3 - Adjusting the Echo Sounder Picture

Page 3-2

490 Echo Sounder Operations Manual Rev. B2

The picture menu

You can adjust the appearance of echoes in five different ways:

•

gain (for high intensity echoes)

•

clutter (for low intensity echoes)

•

noise limiter (for interference)

•

hue (to choose colors and white level)

•

signal level (to remove weak echoes)

Gain and clutter changes are applied only to new echoes as
they appear on the right side of the screen—earlier echoes are
not affected.

NOTE:

When you override the gain’s automatic settings, the tabs on the

PICTURE

key and

AUTO

key change from green to yellow, indi-

cating the system is no longer in automatic mode. When you turn
the noise limiter on, only the

PICTURE

key tab changes from green

to yellow. Changing the hue or adjusting the signal level has no
effect on the operating mode (the tabs stay green).

Adjusting the gain (strong echoes)

The

gain

setting selects the echo strengths that will be

displayed using the

top

color in the color bar (the

strongest

echoes). Any echoes stronger than this selection will use the
same color and no detail can be distinguished. The gain is
usually set so that seabed echoes are displayed in brown, the
strongest level.

The gain can be also be set automatically by pressing the

AUTO

key. This will provide an excellent picture under most

conditions, and will allow the 490 to reliably detect the seabed
depth.

Gain is normally adjusted in conjunction with

clutter

, as

described on the next page, to maximize its effectiveness.

To adjust the gain:

1. On the

ECHO

screen, press

PICTURE

2. On the

PICTURE

screen, press

GAIN

Содержание 490 Echosounder













































































Результаты поиска

Содержание 490 Echosounder

Отзывы:

Похожие инструкции для 490 Echosounder

Бренды по названию

Популярные бренды

NorthStar 490 Echosounder, Руководство по эксплуатации

Результаты поиска

Содержание 490 Echosounder

Отзывы:

Похожие инструкции для 490 Echosounder

Бренды по названию

Популярные бренды