Northland Crown Royal 1000, Инструкция по установке и эксплуатации, Страница: 11 / 30

InsTallaTIon
Pristine series installation and oPeration Manual • 2011 9
identifying Main Components
(see drawings on page 8)
no. description
1 Baffle
2 Red Indicator Light
3 On/Off Switch
4 Temperature Control
5 Loading Door
6 Latch Catch
7 Ash Clean Out Door
8 Ash Tray
9 Secondary Burn Chamber
10 Heat Exchange Flues
11 Door Lock Bar
12 Exhaust Exit Lever
13 Vent Cap & Water Level Indicator
14 Moulded Brick
15 S 70 Brick
16 1/2 Brick
17 Fire Brick
18 Smoke Exit Connector Bar
19 Switch Trigger
20 Air Gate
21 Overflow
22 Side Panel
23 Smoke Exit Connector Bar
24 Smoke Exit Lid
25 Extension Leg (optional)
26 Leg Brace (optional)
27 Ash Rake
28 Flue Cleaning Rods
29 Flue Cleaning Brush
30 Electric Element Ports
31 Return Port
32 Drain
33 Burner Mount Cover
34 Supply Port
35 Blower
36 Timer
37 Exhaust Area
38 Flapper Unit
39 Exhaust Flange
40 Relays
41 Limit Switches
42 Lifting Hook
43 Top Panel
44 Low Water Cut Off Port/Probe Well B
45 Snap Disc/Furnace Manual Reset
46 Temperature Probe Well A
47 Pump Snap Disc
48 Probe Port
49 Flue Clean Out Cover
50 Rear Access Cover
51 Furnace Electrical Plug
52 Pump Plug
optional: low water cut off switch kit. ask your dealer for details.
Minimum Clearance to Combustibles
Side Wall to Furnace 12” (305 mm)
Back Wall to Furnace 12” (305 mm)
Front of Furnace to Combustibles 48” (1220 mm)
Flue Pipe 12” (305 mm)
Ceiling to Furnace 24” (610 mm)
Floor 0” (0 mm)
installation requirements
1. The Pristine must be installed on a level stable surface,
preferably on a concrete floor but may be installed on
a combustible floor provided that a noncombustible liner
(such as sheet metal or masonry) be placed on the floor,
ensuring the following areas are covered to catch stray
embers:
- Underneath the furnace;
- At least 16” (406 mm) in front and 8” (203 mm) on
either side of the fuel loading and ash removal doors;
- Underneath the chimney connector and extending
at least 2” (50 mm) on either side of the chimney
connector.
2. Adhere to minimum clearance to combustibles as stated
in this manual and in accordance with local, state,
provincial and federal building and fire codes.
3. Install in a large open area when possible. Minimum
enclosed, not well vented, room size is 100 square feet
(9.3m
2
).
4. Room must be vented to outside air, see page 11.
iMPortant: Contact an insurance provider prior to
installation to ensure that installation is in compliance with
local insurance requirements and all terms have been met.