Digital Video Recorder
User Manual
Issue: V 4.3(2020-05-09)
47
Figure 7-4
Add camera screen
Step 2
Input IP address, port, user name and password of camera.
Step 3
Select a protocol from the drop-down list. Remote channel is only used for thermal
imaging cameras.
Step 4
Click
, the camera is added successfully.
If all channels of the DVR are connected by cameras, please delete the cameras that
you don’t need , so that you can add more cameras.
If a IP camera is added manually, input the correct username and password of the
camera below the online device list. The camera will be added successfully. If not the
camera would be shown on list at offline.
7.3.1.3
Delete Camera
Operation Steps
Step 1
Select a camera to delete in the camera list and click
, the delete confirmation
message screen is displaying, as shown in Figure 7-5.
