Northern N2NVR Series Скачать руководство пользователя страница 10

Страница: 10 / 167

Digital Video Recorder
User Manual

About This Document

Issue: V4.3 (2020-05-09)

Add manual input automatic logout time
Restore factory refinement

Symbol Conventions

The symbols may be found in this document, which are defined as follows:

Symbol

Description

Alerts you to a high risk hazard that could, if not avoided.

Alerts you to a medium or low risk hazard that could, if not

avoided, result in moderate or minor injury.

Alerts you to a potentially hazardous situation that could, if

not avoided, result in equipment damage, data loss,

performance deterioration, or unanticipated results.

Provides a tip that may help you solve a problem or save

time.

Provides additional information to emphasize or supplement

important points in the main text.

Содержание N2NVR Series








































































































































































Результаты поиска

Содержание N2NVR Series

Отзывы:

Northern N2NVR Series, Руководство пользователя, Страница: 10 / 167

Результаты поиска

Содержание N2NVR Series

Отзывы: