Network Turret Camera
·
Quick Start Guide
24
24
Steps:
1.
Run the SADP software.
2.
Select an active device.
Please refer to Chapter 3.2 to activate the camera if the camera is
inactive.
3.
Change the device IP address to the same subnet with your
computer by either modifying the IP address manually or checking
the checkbox of Enable DHCP.
Figure 3-5
Modify the IP Address
4.
Input the password to activate your IP address modification.
The batch IP address modification is supported by the SADP; please
refer to the User Manual of SADP for details.
