Northern IP4BIR100, Инструкция по установке и быстрой настройке

Страница: 11 / 33

IP4BIR100 IP Bullet Camera
·
Quick Start Guide
10
10
2 Installation
Before you start:
● Make sure the device in the package is in good condition and all
the assembly parts are included.
● If not using POE, the standard power supply is 12V DC, please
make sure your power supply matches with your camera.
● Make sure all the related equipment is power-off during the
installation.
● Check the specification of the products for the installation
environment.
● Make sure that the wall is strong enough to withstand four
times the weight of the camera and the bracket.
For the camera that supports IR, you are required to pay attention to
the following precautions to prevent IR reflection:
● Dust or grease on the dome cover will cause IR reflection.
Please do not remove the dome cover film until the installation
is finished. If there is dust or grease on the dome cover, clean
the dome cover with clean soft cloth and isopropyl alcohol.
● Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
Installation of Memory Card 2.1
The IP4DIR100 camera supports memory card function. Follow the
steps to mount and unmount a memory card.