Northern IP3VFB, Инструкция по установке и быстрой настройке

Страница: 11 / 31

Network Bullet Camera· Quick Opera on Guide
11
2 Installation
Before you start:
•
Make sure the device in the package is in good condi on and all
the assembly parts are included.
•
Make sure all the related equipment is powered o ff during the
installa on.
•
Check the speci fi ca on of the products for the installa on
environment.
•
Make sure the power supply matches with your required
voltage to avoid damage.
•
If the product does not func on properly, please contact your
dealer or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.
•
Make sure that the wall is strong enough to withstand three mes
the weight of the camera.
For the camera that supports IR, you are required to pay a en on to
the following precau ons to prevent IR re
fl ec on:
•
Dust or grease on the glass cover will cause IR re fl e on.
Please do not remove the glass cover fi lm un l the installa on
is fi nished. If there is dust or grease on the glass cover, clean
the glass cover with clean so cloth and isopropyl alcohol.
Installation & Quick Setup Guide
10