Northern 332101, Руководство пользователя

Страница: 11 / 14

10
• Undo the clamping nut and, holding the handle, tilt the machine head to the left to the
required angle dimension.
• Retighten the clamping nut.
Chip extraction (Fig. 2)
The saw is equipped with a chip collection bag (14). The chip bag (14) can be emptied by
opening the zip fastener at the bottom.
Replacing the saw blade (Fig. 2,3 and 4)
•
Pull out the power plug.
• Swing up the saw head.
• Press the lever and swing up the saw blade guard to the point where the recess in the saw
blade guard is above the flange bolt.
• Press the saw shaft lock (31) with one hand while holding the wrench (a) on the flange bolt
with the other.
• Firmly press on the saw shaft lock (31) and slowly rotate the flange bolt in clockwise direc-
tion. The saw shaft lock engages after no more than one rotation.
• Now, using a little more force, slacken the flange bolt in clockwise direction.
• Turn the flange bolt until it is completely removed.
• Take the blade (5) off the inner flange and pul out downwards.
• Mount the new saw blade in reverse order and fasten.
Important! The cutting bevel of the teeth ( i.e., the direction of rotation of the saw blade), has
to conform with the direction of the arrow marked on the housing.
• Clean the saw blade flanges thoroughly before mounting the saw blade.
• Reattach the movable blade guard (6) in reverse order.
• Before using the saw again, check that the safet devices are in good working order.
CAUTION! Every time that you change the saw blade, check to see that it spins freely in
the groove of the turntable in both perpendicular and 45° angle settings.
MAINTENANCE
• Keep the machine’s air vents unclogged and clean at all times.
• Remove dust and dirt regularly from the machine. Cleaning is best done with compressed
air or a rag.
• Lubricate all moving parts in regular intervals.
• Never use caustic agents to clean plastic parts.