manualshive.com logo in svg

Northern Telecom Meridian M3000, Справочное руководство

Поделиться
Скачать
Northern Telecom Meridian M3000 Скачать руководство пользователя страница 84

7-4   Call Logs

555-4001-112   Standard 05.01   March 1995

Touch  EXIT from the Call Log entry menu when completed.

Paste a call log number

The Call Log is a temporary listing.  Paste any numbers to keep into your
Directory.  When adding numbers into your directory, the chance is given to
change the name in the Directory.  Use Procedure 7-5 to paste a Call Log
number.

Procedure 7-5
Paste a call log number

Touch  Call Log.

Touch  Paste.

Touch the number to paste to the Directory.

Touch  Change Name to change the name for the directory entry.

Touch  Clear and enter a name.

Note:  If a name is not entered, the number itself appears as the Directory
entry.

Touch  OK to add the entry to the Directory.

Touch  EXIT to return to the IDLE screen.

Lock/Unlock the call log

Lock a Call Log to protect it from unauthorized use.  To lock or unlock a
Call Log, set up a password.  The password used for the Call Log is the
same used for your Directory.   If the directory is locked, the locked
directory option is not displayed.  The Call Log must be unlocked before it
is displayed under Touch Profile.  Use procedures 7-6 through 7-9 to
lock/unlock the Call Log.

Note:  The password used for the Call Log is the same as the one used for
your Directory.

Procedure 7-6
Lock a call log with existing password

Touch  Touch Profile.

Touch  Lock Call Log.

Touch  Use Existing Password.

5

1

2

3

4

5

6

7

1

2

3

Содержание Meridian M3000































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды