Northern Telecom Flash Basic 2, Руководство по установке

Страница: 22 / 34

16
Flash Installation Guide P0908433 01
Initializing Flash ACD
To initialize Flash ACD:
1. Enter the System Administration Feature
Code.
The default code is
ƒ · ° ‹.
2. Enter
¤ fl fl ‹ › › (C O N F I G)
and press
OK
.
3. Record the serial number and press
OK
.
This serial number is required if you are
upgrading a system to add Flash ACD to an
existing Flash Voice Mail system.
4. Press
OK
to initialize this system as
Flash ACD only.
To upgrade a new or existing
Flash Voice Mail system to add Flash ACD,
you must enter a software key code and then
press
OK
.
Instructions on how to obtain a software key
code are in the Flash ACD Upgrade Guide.
5. Press
YES
to have display and voice prompts
available in both languages.
Press
NO
to have display and voice prompts
available in one language.
6. Press
ENG
to use English as your primary
language.
Press
FRE
to use French as your primary
language.
Press
SPA
to use Spanish as your primary
language.
Note: Only two of the three languages above
will be available; English and either French
or Spanish.
Pswd:
RETRY
SN:xxxxxxxxxxxxx
Key:
QUIT RETRY
Bilingual:N
NO
Primary lang?
FRE