Northern Lights TA-258, Руководство по сборке и инструкция по эксплуатации

Страница: 33 / 38

32 Assembly Guide and Owner’s Manual
ATTENTION
Afin de réduire le risque de brûlures, de brûlures d’incendie, d'incendie, de choc
électrique ou de blessure, débranchez toujours l'appareil de sa source
d'alimentation avant de le nettoyer ou d'effectuer un entretien. Des précautions
particulières doivent
êêêê
tre prises lors de l'ajustement du tapis de course. Retirez
tous vêtements lâches et attachez vos cheveux. Soyez très prudent pour garder vos
doigts et tout autre objet hors de la courroie et galets, surtout devant le rouleau et
derrière le pont. Le tapis ne s'arrête pas immédiatement si un objet se fait prendre
dans la courroie ou galets.
Cleaning the treadmill
Dirt, dust, and pet hair can block air inlets and accumulate on the running belt. Please vacuum
underneath your treadmill on a monthly basis to prevent excess build-up of dirt that can get sucked
up and get into the inner workings under the motor cover.
We recommend the treadmill be cleaned before and after each workout. Use mild soap and water
to dampen a soft cloth and wipe all exposed surfaces to help removing any dust or dirt. Use a soft
nylon scrub brush to clean the running belt.
Store the Heart Rate Transmitter Chest Strap
Keep the transmitter in a cool and dry place. Do not store wet in non-breathing material, such as a
sports bag. Sweat and moisture keep the electrodes wet and activated. Do not expose to direct
sunlight for extended periods.
Use a sponge or soft cloth dampened in mild soap and water to clean the chest strap. Dry the
surface thoroughly with a clean towel.
Tightening the fasteners
Go through the assembly guide to check all the fasteners on your unit for security every three
months. If fasteners loose, tighten it up.
Belt adjustments
The treadmill is designed so that the tread-belt remains reasonably centered while in use. It is
normal for some belts to drift near one side while in use, depending on a user’s gait and if they favor
one leg. But if during use the belt continues to move toward one side, proper belt adjustments are
necessary to ensure smooth operation.
Check the alignment of the running belt:
1) Make sure that the running surface is level before aligning or adjusting the running belt.
2) Connect the power plug to a dedicated 15 amp power source and turn the unit on.
3) Stand next to the treadmill and press START and , and then press SPEED UP arrow key until the
display shows a speed of 3 mph (5kph).