Northern Industrial 628575 Скачать руководство пользователя страница 1

Страница: 1 / 4

QUICK SET-UP GUIDE

This guide is intended to provide quick instructions on the set-up of your new welder.

Please take time to review the operator’s manual prior to operating this unit.

Flux Core 125

Item #628575

For more help visit www.ntwelderhelp.com

Or Call 1-877-304-0294

Содержание 628575

Страница 1: ...ended to provide quick instructions on the set up of your new welder Please take time to review the operator s manual prior to operating this unit Flux Core 125 Item 628575 For more help visit www ntw...

Страница 2: ...he knurled groove is in line with the wire when installed on drive shaft Open the drive roll tension arm on the wire feeder To finish feeding the wire through the gun you will need to remove the gun n...

Страница 3: ...Tube past the drive roll and into the back of the MIG Gun Keep tension on the wire to prevent unspooling on the spool Close the drive roll tension arm Apply tension to the wire by turning the wing nu...

Страница 4: ...ire coils up in your hand without slipping in the drive rolls On the wire compartment access panel is a set up guide Find the type of material being welded and the size of wire you are using Slide ove...