Northern Industrial Tools 141456, Руководство пользователя

Страница: 10 / 15

Page of 15 10
Radio Control Specifications:
Working Voltage
9V–12V
Frequency 433MHz
Power 10mW
Working Temperature -4
o
to 140
o
F
Maximum Control Distance 100 ft.
5. To commence winching operation, start vehicle engine, place transmission in neutral, maintain
engine speed at idle. Never winch with your vehicle in gear or in park, which can damage
your vehicle’s transmission.
6. Never wrap the cable around an object and hook onto the cable when winching.
7. Keep hands, clothing, hair and jewelry clear of the drum area and cable when winching.
8. Never use the winch if the cable is frayed, kinked or damaged.
9. Never allow anyone to stand near the cable, or in line with the cable behind the winch while it
is under power. If the cable should slip or break, it can suddenly whip back towards the winch,
causing a hazard for anyone in the area . Always stand well to the side while winding.
10. Remove switch from 12V power port when winch is not in use.
11. Do not operate multiple winches with same frequency at the same time by remote control
within a distance of 220 feet; interference will occur among radio signals with same frequency.
12. If water enters the handheld controller, immediately remove battery and clean the circuit board
with ethyl alcohol (density required ≥ 98%).
13. Replace batteries in the handheld controller regularly; low voltage will affect performance.