NorthEast Monitoring, Inc. NEMM019-Rev-O
Page 30 of 35
DR200/HE & DR300 Operator’s Manual
Appendices: Appendix D: EMC Information
Appendix D: EMC
Information
Attention should be paid to the following
EMC information prior to installing or
using the Northeast Monitoring DR200/HE
or DR300 Digital Recorder device.
•
Portable and mobile Radio Frequency
(RF) communication equipment may
interfere with the operation of the
device.
•
The device has been tested and found
to comply with IEC/EN 60601-1-2.
•
Computers, cables and accessories not
tested to 60601-1-2 may result in
increased emissions or decreased
immunity of the device.
•
Verify normal operation if utilizing
the device adjacent to or stacked with
other electrical equipment.
Guidance and manufacturer’s declaration – electromagnetic emissions
The Northeast Monitoring DR200/HE and DR300 Digital Recorders are intended for use in the
electromagnetic environment specified below. The customer or user of the Northeast Monitoring DR200/
HE and DR300 Digital Recorder should ensure that it is used in such an environment.
Emissions Test
Compliance
Electromagnetic environment –
guidance
RF emissions CISPR 11
Group 1
Northeast Monitoring DR200/HE
and DR300 Digital Recorders use
RF energy only for its internal
function. Therefore, its RF
emissions are not likely to cause
any in nearby electronic
equipment.
RF emissions CISPR 11
Class B
Northeast Monitoring DR200/HE
and DR300 Digital Recorders are
suitable for use in all establish-
ments other than domestic and
those directly connected to the
public low-voltage power supply
network that supplies buildings
used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage Fluctuations/flicker
emissions IEC 61000-3-3
Not applicable
