NorthEast Monitoring, Inc. NEMM019-Rev-O
Page 19 of 35
Chapter 4 -Recorder Settings,
Error Messages and
Troubleshooting
For Holter recording, you can adjust settings on the recorder between patients only. To begin,
insert a battery to start the recorder.
If 15-second countdown occurs
If your recorder is in Event mode, the 15-second countdown will begin when you put in a new
battery. To interrupt the 15-second countdown, quickly press ENTER, down arrow, up arrow
and then EVENT, in that order. You should now see the NorthEast Monitoring screen. Press
ENTER to continue to move to the main menu.
To Adjust Settings
To adjust the settings, use the green arrows to move up and down between the menu items and
ENTER to accept. The cursor “>” will appear next to the item that you are able to update. Press
ENTER to begin updating that item, and then use the green arrows to adjust the value. When
finished adjusting a value press ENTER to save the value. To return to the previous menu, use
the green arrows to move the arrow to “Return” at the top of the menu and press ENTER.
To Review Settings
At any time, you can remove the battery from the recorder and re-insert. Then interrupt the 15-
second countdown as instructed above. You can now review settings without losing any event
data.
To Update Time and Date
The recorder should save the correct time and date between uses, but if you ever need to update
the time or the date, move the cursor to “Time and Date” and press ENTER. You can now
update Hour, Minutes, Day, Month or Year by moving the cursor with the green arrows and
pressing ENTER.
About
To view the Serial No, the customer code (cc), the Version number of the software on the
recorder, the build number for that software, and the number of times the recorder has been used
in Holter mode.
